Contact

DOCO International B.V.

+31 (0)46 420 06 66 info@doco-international.com

Low Level with high lift

Industrial Door Systems

The low-level power unit provides a system that is easy to install and maintain. The unit is held in place by an ingeniously positioned steel support beam.

Max. high lift

4100 mm

Max. door weight

350 kg

Max. door height

6000 mm

Max. door width

6500 mm

Configurator for industrial doors

You can configure a complete industrial door in just a few steps. Once you have entered all the information, view and download the extensive documentation provided by DOCO. Start the configurator

Features

Low-level support beam

The low-level power unit provides a system that is easy to install and maintain. The unit is held in place by an ingeniously positioned steel support beam.


Power unit mounting

The low-level power unit provides a system that is easy to install and maintain. Low-level positioning is enabled by using a steel beam that keeps the complete power unit in place.


Vertical angle with double sealing system

The high flanged mounting angle positions the door leaf approximately 20 mm from the installation area for easy access to the double slotted holes. The side sealing weather strips guarantee the best door parameters, such as U-value, air and water permeability.


Universal operator support bracket

Our universal operator support bracket ensures a direct connection between the operator and the bearing plates. This support bracket is universal, and is suitable for SOMMER, GFA, Marantec and MFZ-Ovitor operators.


Safety track

The raised track edges prevent the rollers from slipping out of the track. Lateral forces are absorbed by the safety device, especially when closing the door in a curved section.


Heavy duty spring break device

DOCO's spring breakage devices have been developed and tested, using a reliable and safe design.


Alignment

Use the alignment profiles to align the sectional door to the mounting surface. It is not necessary to measure crosswise.


Easy installation / Distance check

Use the c-profile as a spacer for the vertical tracks. This makes installation more accurate, faster and easier. The result is a sectional door that opens and closes perfectly.


Track set connections

Choose flat or curved connections.


Pitched curve

In situations with a sloping roof, it is better to have your door system run at the same angle as the roof. This makes optimal use of the available space. 


How your industrial door system is packaged

The horizontal and vertical track sets are custom made and checked by DOCO before they are despachted. The torsion springs are pre-assembled, and can be attached to the power unit as required, together with the spring break device, cable drum and brackets. After the final inspection, all industrial sets are wrapped in plastic for extra protection during transport so that they can be stacked.

Downloads

Industrial door systems brochure

An overview of our industrial door systems, optional components, production facilities, springs and more Download

Technical specifications

A technical overview of our industrial door systems Download

ITTr industrial doors

ITTr industrial doors Download

Low Level installation manual

The installation manual for our industrial door system: Low level Download

How can we help? 

Would you like to know more about how our products and services can help you? Please contact us. 

I would like to know more